Kohler KDI 1903 TCR

EN
298
12.4 Rubber hoses and manifolds check
Important

Before proceeding with operation, read Par. 3.3.2 .
The check is carried out by applying slight deflection or
bending along the tube/hose and next to the hose clamps.
Components must be replaced if they have clear signs of
cracks, tears, cuts, leaks, or do not retain a certain degree of
elasticity.
1.
Check the condition of all rubber hoses A .
2.
Check whether there are any leakages of air,
refrigerant, oil or fuel next to their connections.
Fig 12.4
Fig 12.5