Kohler KDI 1903 TCR

EN
236
10 FLUIDS FILLING INFORMATION
10.1 Engine oil
Important

Before proceeding with
operation, read Par. 3.3.2 .
1.
Loosen the oil filler cap A or
the oil filler cap C if the cap A
is not accessible.
2.
Add the type and amount of oil
recommended ( Tab. 2.2 ).
Fig 10.1
1.
Remove the oil dipstick B and
check that the level is up to
but does not exceed the MAX
.
2.
If the oil level is not at MAX ,
insert more oil until the MAX
level is reached as indicated
on the dipstick.
3.
Re-tighten the cap A or C .
NOTE: See the Par. 11.1 for the
various configurations of the oil
dipstick.
Fig 10.2
NOTE : Click by side to play the
procedure.
https://www.youtube.com/embed/cVpoy_m253A?showinfo=0&rel=0