Kohler KDI 1903 TCR Workshop Manual

EN
134
7 INFORMATION FOR DISASSEMBLY
7.1 Recommendations for disassembly
Important
 The mark ( ) after the title of a paragraph, indicates that the procedure is not required in order to
disassemble the engine, however the procedures are featured in order to illustrate the disassembly
of components.
 The operator should prepare all equipment and tools in order to enable him to carry out the
operations correctly and safely.
 Before disassembly, perform the operation described in Chap. 5 .
 Before proceeding with operation, carefully read Chap. 3 .
 In order to operate safely and easily, we recommend positioning the engine on a rotating stand for
engine overhauling.
 Seal all injection component unions as illustrated in Par. 2.9.8 during assembly.
 Protect all disassembled components and coupling surfaces subject to oxidation with lubricant.
 Where necessary, reference to special tools to use during disassembly operations is indicated (es.
ST_05 ), identified in Tab. 13.1 - 13.2 - 13.3 .

Kohler KDI 1903 TCR Specifications

General

Brand	Kohler
Model	KDI 1903 TCR
Category	Engine
Language	English