Kohler KDI 1903 TCR

241
EN
11 INFORMATION ABOUT OPTIONAL
COMPONENTS
11.1 Oil dipstick in cylinder head
Important

Before proceeding with operation, read Par. 3.3.2 .
11.1.1 Check
1.
Pull out the dipstick B in the direction of the arrow A .
2.
Check that the mark left by the oil on the dipstick is
between the MIN and MAX notches.
Fig 11.1
11.1.2 Replacement
11.1.2.1 Disassembly
1.
Undo the screw D .
2.
Pull out the oil dipstick hose E in the direction of the arrow
F
Fig 11.2
11.1.2.2 Assembly
Important

Always replace the gasket G every time it is
disassembled.
1.
Insert the gasket G in the seat K of the hose E .
2.
Insert the hose E in the crankcase H .
Fig 11.3