204
• GR25/50: Leica GNSS Spider v4.2 or later must be installed.
• GM10/30: Leica GNSS Spider v4.3 or later must be installed.
Any non-Leica OWI based software requires the GRL117 Extended OWI license installed on the GR/GM receiver to be allowed to
change any configuration on the receiver.
If the GRL117 Extended OWI license is not available on the GR/GM receiver, then a remote port can be configured and activated but
can only be used by Leica GNSS Spider.
To check the currently installed licenses on the receiver, go to Status / Receiver Information.
• The Receiver tab lists the GNSS Spider OWI option as default functionality.
• The Licenses tab shows if the extended OWI option is installed on this receiver.
Related topics
GNNS Spider <-> GR/GM Configuration
GNSS Spider logging session
GNSS Spider data streams
GNSS Spider <-> GR/GM configuration
When working with a GR/GM receiver and an active connection to Leica GNSS Spider, the settings on the receiver can be changed
from either side. The last stored/uploaded settings will overwrite everything that had been configured before.
Starting and Stopping the active GR/GM receiver site in Leica GNSS Spider has only an effect on the __spider logging session and the
GNSS Spider data streams in the receiver.
It activates or deactivates the logging session and deletes or creates the data streams. All other logging sessions and data streams are
not affected by a start or stop of a GR/GM receiver GNSS Spider site.
When the user selects Upload settings in the Leica GNSS Spider software, all settings configured for this site are uploaded to the
connected receiver. Since this includes tracking settings, changes of the site code and the receiver coordinates, logging and streaming
is interrupted every time the GNSS Spider configuration is loaded onto the GR/GM receiver.
For advanced information refer to the Leica GNSS Spider Online Help.
Related topics
GNSS Spider logging session
GNSS Spider data streams
GNSS Spider logging session
MDB logging on GR/GM receivers can be configured and started from GNSS Spider via an active site.
Please see the GNSS Spider online help for more information on how to configure an active GR/GM site.
Only one logging session can be configured and started from GNSS Spider.
To Next Page
