264
Record is repeated for
each observation type
found in #/TYPES OF
OBSERV record.
If only one is given it
applies to all sensors.
The ellipsoidal height of the sensor.
Denotes the measurement type that relates to the
aforementioned “SENSOR MOD/TYPE/ACC”.
Same as used above in “TYPES OF OBSERV
(TN/TE/TT)”.
If empty, the value is valid for all types of
1X
Additional non-standardised information. Usually the
units are listed for the benefit of users.
Marker for the end of the header. Last record in the
header section.
Version 2.11
The table below describes the content of the RINEX auxiliary file version 2.11:
- year (2 digits, padded with 0 if necessary)
Version 2.20 & 3.01
The table below describes the content of the RINEX auxiliary file versions 2.20 & 3.01:
- year (2 digits, padded with 0 if necessary)
Version 3.02
The table below describes the content of the RINEX auxiliary file version 3.02:
- year (4 digits, padded with 0 if necessary)
Notes: