Leica GR30 - Status Tracking: SBAS; Field Description; Related Topics; Status Tracking: BEIDOU

6: Context sensitive help
67
Status tracking: SBAS
Field Description
The table below describes the fields in the Status: SBAS tab.
The information shown is dependent on the settings configured on the GNSS management: Tracking page and which satellite options
are available on the receiver.
Press the Refresh icon to update the displayed data.
Field
Description
Icon
Satellite is used for calculating a DGPS position.
Sat
The Pseudo Random Noise (PRN) number of the satellite.
System
The SBAS satellite system.
S/N L1
The signal to noise ratio on L1. The number is shown in brackets if the signal is not currently being used in
the position calculations.
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
activate or deactivate the Automatic status page reload.
If the health status of a satellite is changed by a user and is different to what is sent in the broadcast
ephemeris, this satellite is shown in brackets. Go to GNSS management / Tracking to change the health
status of a satellite.
Related topics
Tracking: General
Tracking: GPS
Tracking: GLONASS
Tracking: GALILEO
Tracking: BEIDOU
Tracking: QZSS
GNSS management: Tracking
Status tracking: BEIDOU
Field Description
The table below describes the fields in the Status: BEIDOU tab.
The information shown is dependent on the settings configured on the GNSS management: Tracking page and which satellite options
are available on the receiver.
Press the Refresh icon to update the displayed data.
Field
Description
Sat
The Pseudo Random Noise (PRN) number of the satellite.
Elevation
The elevation of the satellite in degrees. An arrow is shown to indicate if the satellite is rising or
setting.
Azimuth
The azimuth of the satellite in degrees.
S/N B1
The signal to noise ratio on B1. The number is shown in brackets if the signal is not currently being
used in the position calculations.
S/N B2
The signal to noise ratio on B2. The number is shown in brackets if the signal is not currently being
used in the position calculations.
Satellite Health
Healthy
Lists the PRN numbers of the healthy satellites.
Bad
Lists the PRN numbers of the unhealthy satellites. The satellites are available in the almanac but are