Leica GR30 - Status: Event Log

4: User Interface
39
Oscillator
Internal - this receiver is configured to use the internal receive clock (default setting).
TCXO, OCXO, Rubidium, Cesium - The receiver is configured to use the listed external
oscillator. If an external oscillator is configured connected, the receiver will not be able to track any
satellites.
An external oscillator is configured with the oscillator fallback option active. No time signal was
detected for more than 5 minutes or the antenna was disconnected for more than 5 minutes. The
receiver is now using the internal clock instead of the selected external oscillator.
This is a single fallback after 5 minutes without automatic return to
external oscillator
No time signal is available from the configured external oscillator.
If no position is available either, no time signal is available to the receiver.
If a position is available, the receiver has not received a time signal from the external oscillator for
more than 5min and an automatic fallback to the internal oscillator has occurred.
Please see GNSS management: Tracking for more information on the
automatic fallback to internal oscillator.
Status: Event log
The Event log box shows the latest eight messages from the Status / Event log page. The Event log box is updated every 5
seconds.
Icon
Description
Information message.
User action: No action is required from the user.
Receiver message.
User action: A change in the receiver operation has occurred. Check that this was an intended change.
Warning message.
User action: Receiver warning message, an action is required from the user.
Hints
On each Web interface page that allows configuration changes, the shown input fields are described in hints. Hints provide a quick
context based help system. For more information consult the online help available via the Show help button .
For better clarity, the hints are hidden per default. Press the Hints button to display the information. After pressing the button, a
blue box appears underneath each field to explain the setting.
Press the Hints button again to hide the hints.