233
12: Default settings
Default settings: Overview
There are two ways of regaining the default receiver settings.
1. Format all settings and reset the complete receiver configuration.
2. Reset the receiver settings for certain settings only.
Format receiver settings via Web interface step-by-step
Detailed information on the reformatting of the
receiver settings using the Web interface.
Format receiver settings via instrument buttons step-by-step
Detailed information on the reformatting of the
receiver settings using the instrument buttons.
A description of which buttons to use to restore
default values.
Related topics
Receiver setup: Tools
Appendix G: GR/GM default settings
Format receiver settings via Web Interface step-by-step
Background information
The Receiver setup / Tools page allows formatting the complete system configuration.
You can select to keep the communication settings or overwrite all settings.
The following communication settings will not be reset: if you select to Keep the communication settings.
• Spider and remote access ports
• Network connection settings (Ethernet, mobile internet, Bluetooth (GR25 only))
• DynDNS settings
• Web server settings
• Changes in the device configuration if the device is used for mobile internet setup or for Spider or remote access
• The installed language
Format receiver settings step-by-step
Follow these steps format the receiver settings.
Select Receiver setup / Tools / Tools tab.
In Format receiver settings, select Keep communication settings or Reset all.
If Keep communication settings is selected, the following communication settings will not be reset
• Spider and remote access ports
To Next Page
Loading...
