6: Context sensitive help
61
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
activate or deactivate the Automatic status page reload.
Related topics
Status: Overview
Status: Receiver information - Options
GNSS management
Receiver setup
Status: Receiver information - Options
Background information
The receiver options tab lists all the options available for this receiver and which of these options are already installed.
• To install new options go to Receiver setup / Tools / Options.
• To view a detailed description of all options and their article numbers go to GR/GM Receiver options.
Field description
The table below describes the fields in the Status: Receiver information, Options tab.
Press the Refresh icon to update the displayed data.
Lists all options installed on the receiver.
Options currently not installed
Lists all options that are currently not installed on the receiver but are available
for purchase and installation.
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
activate or deactivate the Automatic status page reload.
Related topics
Status: Overview
Status: Receiver information
Receiver setup: Option management
Status: Position
Background Information
Shows the currently calculated position and the user entered reference position of the receiver. The receiver's position is configured via
GNSS Management / Site name and coordinates.
• If the entered reference position and currently calculated position differ by more than 100 m, an error message is displayed.
To Next Page
Loading...
