102
Open the suction valve so that the liquid
which flows out of the spraying agent
canister is directly sucked out.
The escaping liquid must not overflow from
the induction hopper.
After cleaning the spraying agent canister:
Close the cleaning nozzle lever.
If necessary, clean further empty canis-
ters.
Flush the induction hopper as required.
Suck the induction hopper empty.
Close the suction valve.
Fold the cleaning nozzle (1) downwards.
Close the cover
Switch the selector switch to the main
tank.
Switch the distributor valve to spraying.
In order to use the water in the fresh water tank as effectively as
possible, we recommend that water is sucked in with a filler hose
via the filler connection of the selector valve for canister cleaning
and cleaning of the induction system.
To Next Page
Loading...
