LEMKEN Primus 10 - Trial Operation of Device

Operation
110
6.11 Trial operation of device
Applications:
 Initial start-up
 Getting to know the individual control
functions
 Before initial use with spraying agents
 After maintenance operations
 After repairs
 Put the ladder in the transport position:
 Fold lever (1) upwards.
 Slide ladder (2) upwards.
 Fold lever (1) downwards.
 Snap lever (1) into a rung of the lad-
der.
 Fill main container with water, see
"Filling main container, page 90".
 Fold out boom, see "Folding out sprayer
boom, page 107".
 Switch on pump with the PTO shaft.
 Operate pump at a maximum of
550 rpm.
 Switch the selection valve to the main
tank.
 Switch diverting valve to spraying mode.
 Switch agitator control to maximum agi-
tator action.
1
2