LEMKEN Primus 10 - 5 Preparations; Preparations on Tractor; Checking the Suitability of the Tractor for the Implement

Preparations
64
5 PREPARATIONS
5.1 Preparations on tractor
5.1.1 Checking the suitability of the tractor for the implement
Check the following before attaching the
implement to the tractor:
Check the required voltage sources
 Check the voltage sources of the tractor.
 A voltage source is available on the
tractor for each device drawing power.
 The power supply of the device is
between 10 and 15 V.
Designation
Volt
Ampere
Socket
Lighting equipment
12
25
DIN ISO 1724
Operation terminal and control
of the device
12
25
DIN 9680
If there is no DIN 9680-compliant socket
outlet:
 Lay a separate cable to the tractor's bat-
tery.
 When laying the cables, ensure they
remain undamaged from thermal or me-
chanical impacts.