70
5.3.1 Conversion of device
The conversion work must be carried out
by qualified service personnel.
Observe the national regulations when ret-
rofitting.
Here, the following options apply:
Allow the height of the towing eye im-
plement to be adjusted by re-screwing.
Have other towing eyes approved by
LEMKEN installed, see "Traction loops,
page 181".
In line with national provisions:Have the
towing device and/or drawbar components
replaced in the registration papers.
5.3.2 Devices with air brake systems
Connect the brake couplings (1) of the
device to the tractor.
With a manual brake force regulator:Set
manual control (2) to the required positi-
on.
Press the red button (3) to release the
parking brake of the device.
To Next Page
Loading...
