91
6.4.1 Standard procedure
Prerequisite: The drain valve (1) is closed
and secured with the blind cap (2).
Read the usage instructions for the
spraying agent.
Observe the respective national regula-
tions and standards regarding the hand-
ling of spraying agents: e.g. water pro-
tection zones, filling of equipment etc.
To prevent remaining quantities of
spraying fluid:
Calculate the spraying fluid quantity
exactly.
Depending on the spray agent, first fill
the main tank with approx. 100 l water.
Add undiluted spraying agent or mixed
spraying fluid.
Fill the main tank up to the desired spray
agent quantity with water, not exceeding
the nominal volume.
To Next Page
Loading...
