105
Clean empty canisters or the induction
hopper container.
After cleaning:
Close the cleaning gun lever by swit-
ching it down to OFF.
Place the cleaning gun in the holder (2).
Because of the limited content of the fresh water tank we recom-
mend that
for the cleaning of empty spraying agent canisters or
flushing of the induction system with fresh water,
fresh water is sucked in from a filler hose via the selector valve,
See "Filling main container, page 90".
6.8 Flushing the induction system
After cleaning empty spraying agent canisters, the induction system can be
flushed with fresh water.
Spraying agent may cause damage to health and pollute the
environment.
When the cover is open, residual particles of spraying agent may
escape and cause a hazard to the operator and the environment.
The cover must be kept closed during flushing.
To Next Page