LEMKEN Primus 10 - Page 106

Operation
104
 Remove the cleaning gun (1) from the
holder (2).
 Switch the distributor valve to the induc-
tion hopper.
 Switch the cleaning gun lever up to ON.
The effect of the cleaning gun can be con-
tinuously regulated with the lever (1).
 Press the handle (2) to activate the
cleaning gun (3).
Spraying is stopped immediately when the
handle (2) is released.
For continuous operation of the cleaning
gun:
 Press the handle (2) together.
 Push in the plunger (4).
 Release the handle (2).
The cleaning gun is now in continuous
operation.
If the handle (2) is pressed again, the
plunger (4) is released from the catch and
the cleaning gun is deactivated.
1
2
1
2
4
3