LEMKEN Primus 10 - Use of Own Wheels or Wheels Which Are Not Listed in the List of Wheels

Technical data
183
Size
Load capacity index (LI)
Speed index (SI)
Load capacity [kg] 25 km/h (A5)
Load capacity [kg] 30 km/h (A6)
Load capacity [kg] 40 km/h (A8)
Maximum permis- sible air pressure [bar]
460/85 R38
(18.4 R38)
167
A8
5.450
4.50
460/85 R42
(18.4 R42)
169
A8
6.440
6.210
5.800
4.50
520/85 R38
169
A8
6.440
6.210
5.800
3.60
580/70 R38
180
A8
8.880
8.560
8.000
4.60
(1) The maximum permissible air pressure is required for the maximum load capacity of the ty-
res.
The tyres mounted on the device are individually matched. It is only permissible to
change tyres if the device data are taken into account.
All permissible tyres of one version can be exchanged.
The following must be taken into account when making the selection:
 Maximum possible tyre width
 Maximum permitted speed
 Adjusting or exchanging of mudguards.
 If necessary, the weight of spraying fluid is heavier than water (e.g. AHL).
10.7 Use of own wheels or wheels which are not listed in the list of wheels
 The axle and braking system of the implement is only deigned for the wheels
which are mounted on the implement or the wheels listed in the original order.
 Wheels which are not listed in the list of wheels and assigned to the particular
version of the implement must not be fitted.