LEMKEN Primus 10 - Check Compatibility of Pesticides with Equipment

Preparations
84
5.8 Check compatibility of pesticides with equipment
Specially approved pesticides and mixed -
compounds may have an adverse effect on
the device materials. This applies in parti-
cular to spraying agents containing sol-
vents and mixed compounds.
The following parts of the device may be
affected by damage:
 Hoses
 Spray lines
 Seals
 Containers
 Pump membranes
 Nozzle valve membrane
To check the compatibility of pesticides
with the device materials:
 Mix pesticides according to manufac-
turer's instructions.
 While stirring, follow the manufacturer’s
instructions for the pesticide.
 Immerse vulnerable parts of the device
(e.g. hoses) in the pesticide for several
hours.
If the following indications are apparent, do
not use the pesticide:
 Pesticide tends to solidify or clump.
 Hoses become particularly soft.
 Seals or membrane sources.