LEMKEN Primus 10 - Wheel Nuts

Maintenance and servicing
166
Diameter
[Nm]
M 22
250
M 24
315
M 27
470
9.8.4 Wheel nuts
The tightening torque for the wheel nuts (1)
with centring spring ring (2) is 550 Nm.
 Remove the protective caps (3).
 Check the torque of the wheel nuts (1)
 after the first 8 operating hours
 after the first use under load
 every 50 operating hours
 If necessary, tighten the wheel nuts in a
diagonal pattern using a torque wrench.
 Fit the protective caps.
 Replace damaged or missing protective
caps.
1
2
3