138
Spray device with the spray gun.
Press handle = water sprays as long
as the handle is pressed.
Fix the pressed handle with a ram (5)
= water sprays until the fixation is lif-
ted.
Pressing the handle again releases
the locking of the ram.
Where applicable, spray device with
cleaning agent. Use an external device,
e.g. a pump sprayer, to apply the
cleaning agent.
Rinse device with water.
After the external cleaning:
Pull and release the hose in a jerk.
The hose is automatically wound onto
the hose reel.
Insert the spray gun into the holder.
Switch off pump via PTO shaft.
7.5 Cleaning the filter
When cleaning the filter, there is a risk of contact with pesti-
cide.
Wear personal protective equipment during the cleaning.
To Next Page
Loading...
