LEMKEN Primus 10 - Requirements of the Tractor

Safety measures and precautions
24
 The maximum permissible speed is determined by the applicable regulations
specific to the country and the wheels which are used.
2.8.3 Requirements of the tractor
 The tractor must have a suitable drawbar coupling for the implement.
 The tractor must have a suitable brake system, which complies with the appli-
cable regulations and the braking system of the implement.
 Ensure that the tractor always achieves the prescribed braking with the imple-
ment attached.
 The permitted axle loads, vertical load on the drawbar coupling, total weight and
transportation dimensions must be complied with.
 The tractor must have a suitable PTO connection for the implement.
 In the case of a horizontally aligned implement, there must be sufficient
clearance between the drawbar coupling and the PTO of the tractor.
 The hydraulic system of the tractor must be compatible with the implement.
 Suitable electrical connections for the implement must be available.
 The permissible power limits of the tractor must be observed.