LEMKEN Primus 10 - Standard Procedure

Cleaning
131
Additional information: Depending on
the pesticide and subsequent intended
use, the main container, piping system and
nozzles may have to be cleaned with
cleaning agents.Please refer in this case to
the operating instructions for the pesticide
products and cleaning agents used.
7.3.1 Standard procedure
Preconditions:
 The flushing valve (F) of the pressure
filter is opened with a ¼ turn.
 The agitator regulation is set to
30 - 40%.
 Switch off nozzles.
 Clean the still moist insides of the main
tank (7) with clean water.
See "Clean main container, page 132".
 Clean the piping system and nozzles by
distributing the spraying fluid.
 Apply spraying fluid over the area most
recently treated:
 In the control select the manual mode
for controlling the spraying fluid quan-
tity.
 Switch on the nozzles.
F