LEMKEN Primus 10 - Check the Pressure at the Pressure Accumulator

Maintenance and servicing
172
9.10.5 Check the pressure at the pressure accumulator
 Check the pressure (1) at the pressure
accumulator
 If the pressure measuring device of
the instrument shows strong vibrations
 If the pressure hoses of the device
vibrate strongly
 After 50 operating hours
Optimal pressure in the pressure accu-
mulator:
 Approx. 4 bar with a spraying pressure
of 1 – 10 bar
 Approx. 6 bar with a spraying pressure
of 5 – 15 bar
 Remove the cap (2).
 Check pressure with a filling unit inclu-
ding a tyre inflation device.
 If there is insufficient pressure at the
pressure accumulator (1), fill the pres-
sure accumulator with a filling device in-
cluding a tyre inflation valve to the spe-
cified pressure.
2
1