126
7 CLEANING
7.1 Standard procedure
Remaining quantities of spraying agent must not be drained off at
the edges of the road or discharged into the sewer system.
Where possible: Reuse collected spraying agent (after consul-
ting the respective spraying agent manufacturer).
Deposit collected spraying agent in the prescribed waste dispo-
sal site (ask the relevant official authority).
Deposits from the spray solution contaminate the main tank, the
piping system and the nozzles.
After distribution, always clean main tank, piping system and
nozzles.
Target: Cleaned unit = Cleaned piping
system, nozzles, main tank and external
surfaces of the unit
Applications:
After work
After the season
Before wintering
Prerequisite: Rinsing system was cleaned
with clean water during the most recent
filling of the unit., see "Flushing the induc-
tion system, page 105".
To Next Page
Loading...
