125
Switch the agitator regulation (E) to ma-
ximum agitator action.
Observe the instructions for use of the
spraying agent used.
Switch on the pump
(2500/3500 l = H | 4500 l = I) via the
pump nozzle.
Operate the pump at the maximum per-
missible speed (550 rpm).
Stir the contents of the main tank until
the spray agent has completely mixed
again (at least 10 minutes).
Return the flush valve (F) to its initial po-
sition.
Put the agitator regulation (E) back into
its initial position.
In the control: Select automatic mode for
controlling the distribution rate.
To Next Page
Loading...
