Maintenance and servicing
175
9.13.3 Inspection of the implement
Every 2 years, have the following work carried out by a qualified, authorised
person:
measurement of the pump output
measurement and calibration of the flow meter
measurement of the pressure sensor
9.14 Control connections
To check the implement as part of an offi-
cial inspection, the implement is equipped
with connections for test equipment.
The connection points are marked with red
union nuts or cable ties.
Official equipment inspections may only be
carried out by qualified and authorized
persons.
9.14.1 Pump performance
Connection (1) for reading pump perfor-
mance.
To Next Page
Loading...
