68
5.3 Attaching the implement
Target: Device is fully available for distri-
bution.
Application: Before using
ATTENTION: To protect the tractor and
device, the latter is suspended in a hori-
zontal position at a vertical angle of
+/-5° to the tractor.
Slowly and carefully, pull the tractor's
trailer coupling up to approx. 10 cm a-
way from the towing eye of the imple-
ment.
Secure the tractor to prevent it from rol-
ling away.
Connect the hydraulic connections of the
device to the tractor.
Align device horizontally:
As required:Adjust the height of the trac-
tor trailer coupling.
If the trailer coupling on the tractor can-
not be adjusted to allow horizontal sus-
pension of the device, the device can be
converted. See "Conversion of device,
page 70".
To Next Page
Loading...
