LEMKEN Primus 10 - Working with the Device

Operation
111
 Perform trial spraying operation:
 Switch on the nozzles.
 Work with the device, see "Working
with the device, page 111".
 Check all components for function and
leak tightness.
 Check spray result.
6.12 Working with the device
Preconditions:
 Device is properly metered and calibra-
ted.
 Spraying agent is mixed or dissolved
evenly.
The following points must be observed
when working with the device:
 Regulations of the spraying agent manu-
facturer
 Regulations of the nozzle manufacturer
 These operating instructions
 Other regulations for handling spraying
agents