Observe the permissible axle loads,
drawbar loads and gross weights as well
as the transport dimensions.
Install and check transport equipment:
Lighting equipment
Warning boards
Protection systems
Bring the device into a central position.
Lock the control unit against unintentio-
nal operation.
Before departure, check the area in the
vicinity of the unit.
No persons may be present in the vicini-
ty of the unit.
Risk of accidents due to inadequate braking deceleration
In the event of insufficient braking deceleration, the combination of
tractor and implement will be unable to be braked or not be
braked quickly enough. This may result in a rear-end collision, and
the driver or other road users may be injured or killed. As a con-
sequence the combination of tractor and implement on slopes
cannot be braked or not sufficiently braked whereupon the tractor
and implement will be damaged and the driver injured or killed.
Use a tractor that, together with the implement, is capable of
achieving a sufficient degree of braking deceleration.
Make sure that the implement is equipped with a fully-functional
braking system.
To Next Page
Loading...
