LEMKEN Primus 10 - Detaching the Implement

Uncoupling the implement
146
8.3 Detaching the implement
 Uncouple the brake lines from the trac-
tor.
 For hydraulic braking system: Attach the
brake line to the holder on the device si-
de.
 Uncouple the cardan shaft from the trac-
tor.
 Attach the cardan shaft to the holder on
the device side.
 Disconnect the electrical lines from the
tractor.
 Attach the electric lines to the holders on
the device side.
 Uncouple the hydraulic pipelines from
the tractor.
 Attach the hydraulic pipelines to the hol-
der (1) on the device side.
 Uncouple the device from the tractor.
1