LEMKEN Primus 10 - Pressure Limit Valves; Electronic Pressure Display; Filter; Tank Capacity

Technical data
190
10.13.3 Pressure limit valves
The pressure limit valves are factory set to 150 bar and may not be adjusted.
10.14 Electronic pressure display
Type:
Liquid crystal display
Pressure detection:
electronic pressure sensor in the pipe cross-section of the
boom
Accuracy class:
1.6% of displayed value
Resolution [bar]:
0.1
Display range [bar]
0 – 16
Display area [cm]
4 x 1.5
Damping:
electronic
10.15 Filter
Diameter
[cm]
Length/Depth
[cm]
Sieve area
[cm²]
Mesh width
[mm]
Filling sieve
39
33
5,230
1.41
Suction filter
78
165
22,500
0.36
Filter on filler hose
175
60
32,987
1.00
Pressure filter
50
210
19,200
0.25
10.16 Tank capacity
Device
Main tank
Clean water
tank [l]
Hand-
washing
tank [l]
Nominal
volume [l]
Actual
volume [l]
2500
2200
2400
320
12
3500
3100
3300
320
12
4500
4200
4400
320
12
 The listed volumes refer to water with a density of 1 kg/l.
 The containers may only be filled up to the permissible axle load.