LEMKEN Primus 10 - Page 108

Operation
106
 Close the cover (1) of the induction con-
tainer.
 To flush the induction system, switch the
following levers up into the ON position:
 Canister flushing nozzle
 Edge wetting
 Agitator nozzle
 Open the suction valve so far that no li-
quid can escape from the induction con-
tainer.
 After flushing, set the following levers
down to the OFF position in order to clo-
se the valves:
 Canister flushing nozzle
 Edge wetting
 Agitator nozzle
1