LEMKEN Primus 10 - Page 77

Preparations
75
Example table
Data recorded
from the type
plate
e.g.
Determina-
tion of the
data by
weighing
e.g.
Determinati-
on of the da-
ta by calcula-
tion
e.g.
Total permissib-
le weight of im-
plement [kg]:
7500
Actual axle
load, imple-
ment empty
[kg]:
3000
Permissible
capacity of the
implement
[approx. l]:
3000 / 0.85 =
~3530
Permissible axle
load [kg]
6000
Permissible
filling capacity
AHL 30% [l]:
2718
Permissible im-
plement support
load [kg]
1500
 With the implement empty, drive onto a weighbridge, so that only the axle is
standing on the scale.
 Determine the axle load of the implement (example 3000 kg).
 Calculate the permissible axle load [kg] by subtracting the actual axle load of
the empty implement from the permissible axle load of the implement (e.g.:
6000 kg – 3000 kg = 3000 kg).
 If the load bearing capacity of the pair of wheels which is mounted on the im-
plement is ≥ 6000 kg, the implement may be filled with a maximum of 3000 kg
on the axle.
 By distributing the content of the tank to the axle load and the support load, the
filling capacity of the tank is increased by the factor / 0.85 (Calculated permis-
sible axle load / 0.85). Example: 3000 kg / 0.85 =~3530 kg.
 For spraying agents with water as the carrier substance (Density = 1 kg/dm³)
the implement may be filled with a maximum of 3530 l.
 If fresh water fro cleaning is also carried (e.g. 400 l) this must be deducted from
the filling quantity (e.g.: 3530 l – 400 l = 3130 l).