95
Set agitator regulation (E) to maximum.
Switch diverting valve to spraying mode.
Monitor the filling of the main tank with
the following aids:
Fill level indicator (4)
Display unit at the operating and ad-
justment centre
Operation terminal
To ensure the main container does not
overflow: Stop filling the main tank in ti-
me.
Pull filling hose out of the external water
source
Or
remove the filling hose from the external
water connection.
Remove the filling hose from the intake
connection.
Close the intake connection with the
blind cap.
Switch the selection valve of the spray
pump (A) to change-over valve (C).
Switch the switchover valve (C) to the
main tank.
Device with 4500 l:Switch the selection
valve of the agitator pump (B) to the
main tank.
To Next Page
Loading...
