a. Rotate the latch on the riser cage to open position.
b.
Disengage the PCIe adapter from the cage.
Step 4. Disconnect the cables from the riser card. For more details, see
Internal Cable Routing Guide.
Step 5. Repeat the previous two steps on the full-height cage.
Step 6. Remove the riser cards from both riser cages.
Figure 106. Removing the riser card from low-profile cage
Figure 107. Removing the riser card from full-height cage
114 ThinkSystem SR630 V4 User Guide
To Next Page
Loading...
