3-14 Service Manual
5060-4xx
REGISTRATION
Use REGISTRATION to align the black image on the page. Use ALIGHNMENT to align the individual colors. The
black image should be aligned before the individual colors are aligned.
To set Registration:
1. Select REGISTRATION from the Diagnostics Mode.
B=Bottom margin
T=Top margin
L=Left margin
R=Right margin
s=Negative values, space blank for positive values
xx=Margin value
*=Current value
2. Press Go to print the Quick Test Page. Current margin settings are listed on the printout.
3. Determine how values should change to align the arrows to the top, bottom, right, and left margins. Align
the Registration Line to the edge of the page.
The print registration range is:
Note: Adjusting the Top and Right margins moves the entire image. Adjusting the Bottom and Left margins
causes the image to expand or compress. It is easier to adjust the Top and Right margins, first, then adjust
the Bottom and Left.
T=sxx* B=sxx*
L=sxx* R=sxx*
Top Margin: -25 to +25 Increasing the value moves the image down the page. Always adjust
the top before the bottom margin.
Bottom Margin: -25 to +25 Increasing the value stretches the image toward the bottom of the
page.
Right Margin: -15 to +15 Increasing the value moves the image to the left on the page. Always
adjust the right before the left margin.
Left Margin: -15 to +15 Increasing the value stretches the image toward the left margin.
To Next Page
Loading...
