Diagnostic aids 3-15
5060-4xx
4. Enter the values.
The Top margin sign/value pair blinks. This indicates it is the margin value being changed.
• To select the margin value to change, press Select until the margin value pair you want to change is
blinking.
• To change the margin value press Menu.
• When the value you want is displayed, press Select to save the value.
5. To verify the margin values are correct print the Quick Test Page from the registration screen. Press Go to
print the test page. While printing, Quick Test Printing is displayed. Once printing is complete, the
Registration screen appears. See a sample of the “Quick Test Page” on appendix page B-8.
Print the Quick Test Page on letter or A4 paper.
6. To exit the Registration menu, press Return.
ALIGNMENT MENU
Aligns the image on the page for the individual colors: cyan, yellow and magenta. The black image should be
aligned using REGISTRATION before the individual colors are aligned.
Selections include:
CYAN
YELLOW
MAGENTA
Setting alignment for color
1.
Select ALIGNMENT MENU from the Diagnostics mode.
2. Select CYAN, YELLOW, or MAGENTA.
The following screen is displayed:
3. Press Go to print Alignment Test pages before changing any of the settings. See “Printhead electronic
alignment test page—Magenta (one of two)” on appendix page B-10 for an example of the magenta
pages in color.
Note: The Alignment Test Pages should be printed on A4 or Letter paper.
The printer tries to print the test page from the default paper source, however if the default source only
supports envelopes, then the page prints from Tray 1.
4. Determine which settings to change and follow the instructions on the printed sheets to determine the
adjustment.
5. Change the values.
• When the alignment screen is displayed, the Top Margin sign/value pair flashes. To change the value,
press Menu to increase or decrease. Once the value is displayed, press Select to save the value and
move to the next value.
• The margin values blink in the following order: Top, Left, Right and Theta (Z). To skip a margin value,
because its value is correct, press Select. The current value remains the same.
T=sxx* R=sxx*
L=sxx* Z=sxx*
Value: Description: Range:
T= Top Margin Offset -127 to +127
L= Left Margin Offset -300 to +300
R= Right Margin Offset -350 to +350
Z= Theta Offset (Skew
compensation)
-16 to +16
s =sign for negative values (this space is blank for positive values)
xx =margin value
* =Current value
To Next Page
Loading...
