4-50 Service Manual
5060-4xx
7. Release the MPF latch (F) and remove the MPF.
Nip relief handle
Go to “Nip relief handle” on page 7-17 for part number.
1. Remove the left lower cover to access the nip relief handle. See “Left lower cover” on page 4-18.
2. Remove waste toner container.
3. Reinsert paper tray into printer.
4. Remove the broken pieces of old handle.
a. Pull up the upper piece of handle to raise the nip relief link (A) and rotate upper piece of handle 90°
clockwise to free it from the nip relief link.
To Next Page
Loading...
