Diagnostic information 2-59
5060-4xx
153 error code
Yellow cartridge drive assembly
Note: Any time any of the cartridge drive motor assemblies are replaced perform the “Motor Detect” on
page 3-17. If this procedure is not performed, error code 168 is displayed.
5
Replace the system board.
Does this fix the problem?
Problem solved Call your next
level support
Step Actions and questions Yes No
1 Indicates that the yellow cartridge drive motor has
either failed to lock or has lost lock. Check the yellow
cartridge drive motor cable connection to J29 on the
system board.
Is the cable installed correctly?
Go to step 2 Install the cable
correctly
2
Check the yellow cartridge drive motor Cable
connection to the yellow cartridge drive motor card.
Is the cable installed correctly?
Go to step 3 Install the cable
correctly
3
Check continuity of the yellow cartridge drive motor
cable.
Is there continuity?
Go to step 4 Replace the
yellow cartridge
assembly cable
4
Replace the yellow cartridge drive assembly. Perform
“Motor Detect” on page 3-17.
Does this fix the problem?
Problem solved Go to step 5
5
Replace the system board.
Does this fix the problem?
Problem solved Call your next
level support
Step Actions and questions Yes No
To Next Page
Loading...
