Lexmark C760 - Cartridge Drive Assembly

4-30 Service Manual
5060-4xx
Cartridge drive assembly
Note: Drive assemblies must be removed in the following order until the desired assembly can be removed:
• Black
• Magenta
• Cyan
• Yel l ow
Go to “Cartridge drive assembly, cyan/magenta/black (one drive assembly per package)” on page 7-29 for
part number.
1. Remove inner system board shield. See “Inner system board shield” on page 4-43.
2. Remove the cartridge drive assembly mounting screws (A). Black is shown.
3. Disconnect the cable (B) from the cartridge drive assembly.
4. Remove the cartridge drive assembly.