Diagnostic information 2-63
5060-4xx
159 error code
Yellow cartridge drive assembly
Note: Any time any of the cartridge drive motor assemblies are replaced perform the “Motor Detect” on
page 3-17. If this procedure is not performed, error code 168 is displayed.
160 error code
ITU drive motor service check
Step Actions and questions Yes No
1 The yellow cartridge drive motor has either failed to
lock or has lost lock. Check the yellow cartridge drive
motor cable connection to J29 on the system board.
Is the cable installed correctly?
Go to step 2 Install the cable
correctly
2
Check the yellow cartridge drive motor cable
connection to the yellow cartridge drive motor card.
Is the cable installed correctly?
Go to step 3 Install the cable
correctly
3
Check continuity of the yellow cartridge drive motor
cable.
Is there continuity?
Go to step 4 Replace the
yellow cartridge
assembly cable
4
Replace the yellow cartridge drive assembly. Perform
“Motor Detect” on page 3-17.
Does this fix the problem?
Problem solved Go to step 5
5
Replace the system board.
Does this fix the problem?
Problem solved Call your next
level support
Step Action and questions Yes No
1 Error code 160 indicates that an incorrect motor has
been detected. Replace the “ITU drive motor” on
page 4-45.
Note: Anytime the ITU drive motor or ITU drive motor
assembly is replaced, perform the “Motor Detect” on
page 3-17.
Is error code 160 still shown?
Call your next
level support
Problem solved
To Next Page
Loading...
