Repair information 4-45
5060-4xx
3. Cut the two cable ties (B).
4. Remove the three ITU drive assembly mounting screws (C) and disconnect the ITU drive motor cable (D).
5. Move the bottom of the ITU drive assembly toward you as you rotate the top of the assembly out of the
printer. Be careful not to damage the large drive gear as you remove the ITU drive assembly.
ITU drive motor
Go to “ITU drive motor assembly” on page 7-23 for part number.
1. Remove the black cartridge drive assembly. See the removal for the “Cartridge drive assembly” on
page 4-30.
2. Remove the ITU drive motor mounting screws (B), disconnect the cable (A), and remove the motor.
C BBD
To Next Page
Loading...
