1-2 Service Manual
5060-4xx
Options and features
Lexmark C76x paper handling options support the Lexmark C750/C752/C76x printers, however the color of the
covers do not match the C750 and C752 models. The C76x envelope drawer is not compatible with the C750.
Note: Do not use Lexmark C750/C752 options on the Lexmark C76x printers.
• 500-Sheet drawer - (includes 500-sheet tray and support unit) installs beneath the printer and holds
approximately 500 sheets of 20 lb, 75 g/m
2
paper. Up to three drawers are supported simultaneously, or an
option drawer and high-capacity input tray. All models of Lexmark C76x.
• 500-Sheet tray - tray for special media temporarily replaces the standard tray in a 500-sheet drawer and
holds approximately 500 sheets of 20 lb, 75 g/m
2
paper. All models of Lexmark C76x.
• Duplex option - offers two-side printing. The first option under a duplex option must be a 500-sheet drawer.
All models of Lexmark C76x.
• 2,000-Sheet drawer (HCIT) - installs beneath the printer and below any other optional input sources and
holds approximately 2,000 sheets of 20 lb, 75 g/m
2
paper. Models 421 and 422.
• Output expander - installs above the printer primary output bin to offer an additional output destination.
This holds approximately 650 sheets of 20 lb, 75 g/m
2
paper. Only one output option above the printer is
supported. Models 421 and 422.
• 5-Bin mailbox - installs above the printer primary output bin to offer five output destinations in one option.
Each of the five bins supports approximately 100 pages of 20 lb, 75 g/m
2
paper. Only one output option
above the printer is supported. Models 421 and 422.
• Finisher - offers stapling, hole punching, offset stacking and an additional output bin. Two models are
available, a short and a tall one. Hole punching for 2-, 3-, or 4-hole left-edge is available. The single staple
position is the upper left corner. The finisher supports up to 3,000 sheets of non-stapled, non-punched
media. For stapled media, the output bin supports up to 90 stapled sets or 2,700 sheets. The stapler
staples a maximum of 30 sheets per set. Each printer supports one finisher. Models 421 and 422.
• Envelope drawer - installs beneath the printer, and holds approximately 60 envelopes (20 lb, 75 g/m
2
). Up
to three envelope drawer are supported or one envelope drawer and a high-capacity input tray. Models 421
and 422.
• Outdoor media drawer - installs beneath the printer and holds up to 100 sheets of outdoor media suitable
for outdoor use. Models 421 and 422 only.
• Banner tray - extension allows printing of banner-width paper. Models 421 and 422 only.
High performance
•
Up to 25 ppm black or color
• 500 MHz RISC processor (non-network) or 600 MHz (network)
• 128MB RAM
• Time to first page
– Black: less than 13 seconds
– Color: less than 15 seconds
Print quality
1200 x 1200 dpi and 4800 CQ.
Heavy volume reliability
•
Up to 4,000-page average monthly duty cycle
• Up to 60,000-page maximum duty cycle based on a single month usage
To Next Page
Loading...
