4-68 Service Manual
5060-4xx
Redrive assembly
Go to “Redrive assembly” on page 7-14 for part number.
1. Remove the redrive door. See “Redrive door” on page 4-19.
2. Remove the fuser bottom duct. See “Fuser bottom duct” on page 4-36.
3. Remove the redrive assembly screw (A) type “323” on page 4-3.
4. Remove the drive belt (B) from the lower redrive pulley.
5. Remove the redrive assembly.
Note: When you reinstall the redrive assembly be sure to align the notch in the redrive assembly with tab (C).
A(323)
To Next Page
Loading...
