Lexmark C760 - Fuser Drive Assembly; Fuser Drive Card Assembly

Repair information 4-37
5060-4xx
Fuser drive assembly
Go to “Fuser drive assembly” on page 7-10 for part number.
1. Remove the fuser bottom duct. See “Fuser bottom duct” on page 4-36.
2. Swing lever (A) and disengage VTB shaft.
3. Remove the fuser drive assembly screws (A) type “323” on page 4-3 and remove the assembly.
Fuser drive card assembly
Go to “Card assembly - fuser drive” on page 7-10 for part number.
1. Remove the rear cover. See “Rear cover” on page 4-16.
2. Remove the fuser fan. See “Fuser fan” on page 4-38.
3. Disconnect the cable (A).
4. Remove the three screws (B).