Lexmark C760 - Vacuum Transport Belt (VTB)

Repair information 4-77
5060-4xx
Vacuum transport belt (VTB)
Go to “Vacuum transport belt assembly” on page 7-11 for part number.
1. Remove the transfer plate assembly. See “Transfer plate assembly” on page 4-76.
2. Remove the fuser bottom duct. See “Fuser bottom duct” on page 4-36.
3. Remove the two front screws (A).
4. Loosen belt (B) on redrive assembly and remove from redrive gear.
5. Remove belt from gear on vacuum belt transfer unit.