General information 1-5
5060-4xx
Power and electrical specifications
Average nominal power requirements for the base printer configuration (110 volt). (Power levels are shown in
watts.) Maximum current shown in amp ergs.
Note: Using a 220 to 110 power converter with the 110 volt printer is not recommended.
All models are Energy Star compliant.
Electrical specifications
110 Volt model
• 110 to 127 V ac at 47 to 63 hertz (hz) nominal
• 99 to 137 V ac, extreme
Operating clearances
Acoustics
All measurements are made in accordance with ISO 7779 and conform with ISO 9296.
Printing states Lexmark C76x(n) Lexmark C76xdn
Printing - average power
Base model 500 500
All options 540 540
Idle - average power
Power Saver On 30 31
Power Saver Off 180 180
Printing - average current (110 V) 5.3 5.3
Printing - maximum current (110 V) 10.2 10.2
Printer Side Model Measurement
Left side All 24 in. (609.6 mm)
Right side All 15 in. (381 mm)
1
Front All 20 in. (508 mm)
Rear All 12 in. (304.8 mm)
Top C76x(n) 42 in. (1,066.8 mm)
2
C76xdn 34 in. (863.6 mm)
2
1
Allow 1,219 mm (48 in.) clearance to the right if you are adding a finisher.
2
Allow clearance above the printer front door clearance and for adding options, such as additional
input drawers, output expander or 5-bin mailbox.
Model Status
1-Meter average sound
pressure
Lexmark C76x(n) 4800 CQ printing 52 dBA
Idle (standby) 34 dBA
Lexmark C76xdn 4800 CQ printing 52 dBA
Idle (standby) 34 dBA
To Next Page
Loading...
