General information 1-13
5060-4xx
Envelope
7 ¾ Envelope 3.875 in. x 7.5 in. (98 mm
x 191 mm)
xx x x
9 Envelope 3.875 in. x 8.9 in. (98 mm x
225.4 mm)
xx x x
10 Envelope 4.125 in. x 9.5 in. (105 mm
x 241 mm)
xx x x
DL Envelope 4.33 in. x 8.66 in. (110 mm
x 220 mm)
xx x x
C5 Envelope 6.38 in. x 9.01 in. (162 mm
x 229 mm)
xx x x
B5 Envelope 6.93 in. x 9.84 in. (176 mm
x 250 mm)
xx x x
Other envelope
3
3.87 x 6.38 in. to 6.93
x 9.84 in. (98.4 x 162 mm to 176 x 250
mm)
xx x x
1
When Universal is selected, the page is formatted for 8.5 x 14 in. (215.9 x 355.6 mm), unless the size is specified in
the software application.
2
Narrow media should be loaded with the length in the feed direction (portrait).
3
When Other Envelope is selected, the page is formatted for 8.5 x 14 in. (215.9 x 355.6 mm) unless the size is
specified in the software application.
4
Statement and Folio are supported as standard size through software only. Tray size sensing must be turned off
before this standard size is visible in the paper-size menu on the operator panel.
5
2-hole punch is supported.
6
3-hole punch is supported.
7
4-hole punch is supported.
8
Option available on models 221 and 222 only.
9
Use only approved outdoor media in the outdoor media tray.
Media size supported
500-sheet input
Multipurpose tray
Envelope drawer8
2,000-sheet drawer
8
Outdoor media tray8
Banner tray8
Duplex
Standard output
5-bin mailbox
8
Output expander
8
Finisher to staple,
hole punch, offset
stack or with output bin
8
To Next Page
Loading...
