1-16 Service Manual
5060-4xx
Finisher (Output bin, Offset Stack)
Paper
b, f
Xerographic or
business paper
16 to 19.9 lb bond (60 to 74.9 g/m
2
grain long)
20 to 47 lb bond (75 to 176 g/m
2
grain long)
Specialty papers Gloss book 60 to 120 lb book (88 to 176 g/m
2
grain long)
Finisher (Staple and Hole Punch)
Paper Xerographic or
business paper
16 to 19.9 lb bond (60 to 74.9 g/m
2
grain long)
20 to 32 lb bond (75 to 120.4 g/m2 grain long)
Specialty papers Gloss book 60 to 84.5 lb book (88 to 125 g/m
2
grain long)
5-Bin Mailbox
Paper Xerographic or
business paper
16 to 19.9 lb bond (60 to 74.9 g/m
2
grain long)
20 to 24 lb bond (75 to 90 g/m
2
grain long)
a
For 60 to 176 g/m
2
paper, grain long fibers are recommended. For papers heavier than 176 g/m
2
, grain short
is preferred.
b
Paper less than 75 g/m
2
limited to less than 60% relative humidity and is not supported in duplex.
c
Pressure-sensitive area must enter the printer first.
d
100% cotton content maximum weight is 24 lb bond. 28 lb envelopes are limited to 25% cotton content.
e
28 lb bond envelopes are limited to 25% cotton content.
f
The duplex option supports the same types and weights as the printer except 16 to 19.9 lb (60 to 74.9 g/m
2
)
grain long paper, transparencies, labels, envelopes or A5 card stock.
g
Vinyl labels are supported only when printing environment and media are 20 to 23° C (68 to 90°F).
h
Refer to the Converter Listing on Lexmark's Home Page and Automated FAX system (LEXFAX) for
information on whether your vinyl label converter has passed Lexmark's criteria. Refer to the Card Stock and
Label Guide for more details.
i
Lexmark transparency numbers 12A5940 and 12A5941 are supported from the standard tray, optional
500-sheet trays and the multipurpose feeder.
j
Lexmark transparency numbers 12A5150 and 12A5151 are supported from the multipurpose feeder only.
k The web oiler might be used for extensive use of vinyl or dual web labels. See “Web oiler upgrade kit and
replacements” on page 1-17.
Media Weight
To Next Page
Loading...
